Sealux Pro 25 Sealing Kit- Ideal for behind tile installations.
Sealux Pro 25 profiles are most suitable to seal joints where the gap between the vertical and horizontal surface is not greater than 12mm and the thickness of the tile is not greater than 10mm.
Sealux shower seals combine a rigid pvc strip with Sealux-N silicone. To install a Sealux seal the strip is filled with Sealux-N silicone and planted over the joint. Each strip has a green tape applied to the inside face. This tape is a silicone bond-breaker. The silicone will not bond to this part of the strip. To accommodate joint movement the silicone releases off the green tape and stretches like an elastic band to create a flexible bridge between the strip and the ledge.
This 'bond-breaker' ape creates great flexibility in the silicone, the 'shielding' effect of the strip over the silicone promotes durability and hygiene in the shower environment and hence it is allowed to stretch during joint movement.
Sealux Pro 25 Kits are fixed to wall with tile adhesive, and are intended for behind tile installation only.
It is typically fitted to either a shower tray, bath or worktop that require a waterproof joint to be maintained.
Installing a Sealux seal, Please see our installation video and our PDF instruction document.
|Dimensions||1.850m x 0.020m / 1850mm x 20mm|
|Box Contents||2 x trims, each trim measures 1850mmx 25mm,
2 x tubes of Sealux-N Silicone,
1 x Mitre Box,
2 x End caps,
1 x Spatula,
3 x Alcohol Wipes
Did a new bathroom, It was my first time using it, was recommended to use it by a plumber mate, found it very good but check out installations before you start.
The step by step installation method promoted below is focused on clearly explaining a series of simple tasks that will result in a competent installation and maximise the long term benefits of our product. Shower Seals are about leak prevention - and we recommend you read the installation brochure below and or view and understand how to thoroughly seal a shower or bath from our Video below.